Cit:Costa.etal:2014

Aus Salzwiki
Version vom 14. Januar 2016, 14:25 Uhr von Bhentschel (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „{{Literatur |Autor=Costa D. and Delgado Rodrigues, J. |Jahr =2014 |Titel=Monitoring of the salt mist aging test with DRMS |Bibtex= |DOI=10.5165/hawk-hhg/248 |Lin…“)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen
Autor Costa D. and Delgado Rodrigues, J.
Jahr 2014
Titel Monitoring of the salt mist aging test with DRMS
Bibtex
DOI 10.5165/hawk-hhg/248
Link Datei:20 SWBSS-2014 Costa etal.pdf
Bemerkungen In: De Clercq, Hilde (editor): Proceedings of SWBSS 2014. Third International Conference on Salt Weathering of Buildings and Stone Sculptures Royal Institute for Cultural Heritage, Brussels, Belgium, 14-16 October 2021, S. 275-288


Eintrag in der Bibliographie

[Costa.etal:2014]Costa D.; Delgado Rodrigues, J. (2014): Monitoring of the salt mist aging test with DRMS. In: Hilde De Clercq (Hrsg.): Proceedings of SWBSS 2014 3rd International Conference on Salt Weathering of Buildings and Stone Sculptures,KIK-IRPA, Royal Institute for Cultural Heritage Brussels 275-288, 10.5165/hawk-hhg/248.Link zu Google ScholarLink zum Volltext

Keywords[Bearbeiten]

salt mist test, drilling resistance, natural stone, drill bit wear effect

Abstract[Bearbeiten]

Salt mist test can be used to evaluate the durability of porous materials. Besides mass loss, the paper discusses the use of DRMS (drilling resistance measurement system) to monitor changes in strength due to salt crystallisation. Drilling resistance was used to characterize changes promoted in very different lithotypes, namely carbonate rocks and one variety of sandstone. The results show that this technique is able to identify fingerprints of the presence of salts on the profiles seen as increments in resistance. Damage zones can also be detected on the profiles of the aged samples, after desalination. The results clearly indicate the influence of moisture content on the drilling data. Although considered as a minimally invasive action, the method produces a small hole that has some influence on the ongoing decay process. In this paper illustrative examples are presented, some advantages and drawbacks are indicated in order to correctly evaluate the results when it is possible to use it to evaluate the action of salts.

Zugehörige Primärdaten[Bearbeiten]